For a fraction of the cost of any comparable machine, the Neutec J-2R IV gives you superior castings and greater production capacity. This exceptional machine combines advanced technology with practical design to give you the casting capability you need today and well into the future.

The J-2R IV employs an oxygen-free atmosphere for the metal during melting and pouring to help eliminate oxidation. The large-volume graphite crucible also removes oxygen that may previously have been dissolved in the metal. This means fewer defects and lower reject rates.

Cast at the optimum temperature for any design without overheating the metal. The J-2R IV measures the metal temperature in the center of the metal pool, giving you accurate casting temperatures. The crucible is a bottom-pour design, so there is very little drop in metal temperature from crucible to flask.

After initial warm-up, the casting cycle time of the J-2R IV is a fast 6 to 8 minutes, depending on the size of the load. The large-volume crucible holds 184cc of metal (902g 14KY or 722g SS). Accommodates flask sizes from 2.5" to 4" in diameter and up to 9" high.

Simple to install and operate in only three square feet of bench space, the J-2R IV requires only that you set the temperature controller for the desired casting temperature, add the casting grain to the crucible, insert the flask and (at set temperature) push the casting lever.
whichmachinebutton.gif (1171 bytes)

Registration Reddot Members Reddot Contact Info Reddot About Rio Reddot Trade Shows
Santa Fe Symposium Reddot Neutec/USA Reddot Products Reddot Tips & Tricks

Neutec Reddot 7500 Bluewater Road NW, Albuquerque, New Mexico 87121-1962
phone:1-505-839-3550 Reddot fax:1-505-839-3525 Reddot e-mail:info@tbg.riogrande.com